Dynomotion

Group: DynoMotion Message: 10260 From: Dan Date: 10/7/2014
Subject: Something is wrong
Tom,
I just switched to Version 4.33f and I am getting the following errors. With a g-code file I have run before.
 
Screenshot 2014-10-07 07.04.57
Screenshot 2014-10-07 07.05.44
   @@attachment@@
Group: DynoMotion Message: 10261 From: Dan Date: 10/7/2014
Subject: Re: Something is wrong [4 Attachments]
Tom,
A quick follow up, I send the wrong init file but it does not matter. That is not the problem. I sent back to 4.32 and it works fine now.
 
My setup
Thread 1 - Modbus code
Thread 2 – Initialization code
Thread 3 – Homing
 
 
Dan
 
Sent: Tuesday, October 07, 2014 7:25 AM
Subject: [DynoMotion] Something is wrong [4 Attachments]
 
 

Tom,
I just switched to Version 4.33f and I am getting the following errors. With a g-code file I have run before.
 
Screenshot 2014-10-07 07.04.57
Screenshot 2014-10-07 07.05.44
   @@attachment@@
Group: DynoMotion Message: 10274 From: Tom Kerekes Date: 10/8/2014
Subject: Re: Something is wrong [1 Attachment]
Hi Dan,

Can you post that GCode File and your configuration (and programs if any) for M3, M6, S ?

Thanks
TK

Group: DynoMotion Message: 10275 From: engnerdan Date: 10/8/2014
Subject: Re: Something is wrong [2 Attachments]
I did all of that with the first email. 

Dan


Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: "Tom Kerekes tk@... [DynoMotion]"
Date:10/09/2014 12:50 AM (GMT-06:00)
To: DynoMotion@yahoogroups.com
Subject: Re: [DynoMotion] Something is wrong [2 Attachments]

 
[Attachment(s) from Tom Kerekes included below]

Hi Dan,

Can you post that GCode File and your configuration (and programs if any) for M3, M6, S ?

Thanks
TK

Group: DynoMotion Message: 10305 From: Dan Date: 10/10/2014
Subject: Re: Something is wrong [2 Attachments]
Tom,
Here are the files
 
 
 
Dan
 
Sent: Thursday, October 09, 2014 12:47 AM
Subject: Re: [DynoMotion] Something is wrong [2 Attachments]
 
 

Hi Dan,

Can you post that GCode File and your configuration (and programs if any) for M3, M6, S ?

Thanks
TK
 
Group: DynoMotion Message: 10325 From: Tom Kerekes Date: 10/13/2014
Subject: Re: Something is wrong [4 Attachments]
Hi Dan,

Sorry for the delay.  I think we were finally able to duplicate the problem.  I assume you have a buffered "wait bit" configured as your M6 code?  We found a bug when a wait bit with no other coordinated motion is commanded.

Please see if this Test Version 4.33g resolves the problem.

https://groups.yahoo.com/neo/groups/DynoMotion/conversations/messages/10324

Regards
TK


From: "'Dan' engnerdan@... [DynoMotion]" <DynoMotion@yahoogroups.com>
To: DynoMotion@yahoogroups.com
Sent: Friday, October 10, 2014 6:04 AM
Subject: Re: [DynoMotion] Something is wrong [4 Attachments]

 
[Attachment(s) from Dan included below]
Tom,
Here are the files
 
 
 
Dan
 
From: mailto:DynoMotion@yahoogroups.com
Sent: Thursday, October 09, 2014 12:47 AM
To: DynoMotion@yahoogroups.com
Subject: Re: [DynoMotion] Something is wrong [2 Attachments]
 
 
Hi Dan,

Can you post that GCode File and your configuration (and programs if any) for M3, M6, S ?

Thanks
TK
 
From: "'Dan' engnerdan@... [DynoMotion]" <DynoMotion@yahoogroups.com>
To: DynoMotion@yahoogroups.com
Sent: Tuesday, October 7, 2014 5:46 AM
Subject: Re: [DynoMotion] Something is wrong [1 Attachment]
 
 
[Attachment(s) from Dan included below]
Tom,
A quick follow up, I send the wrong init file but it does not matter. That is not the problem. I sent back to 4.32 and it works fine now.
 
My setup
Thread 1 - Modbus code
Thread 2 – Initialization code
Thread 3 – Homing
 
 
Dan
 
From: mailto:DynoMotion@yahoogroups.com
Sent: Tuesday, October 07, 2014 7:25 AM
To: DynoMotion@yahoogroups.com
Subject: [DynoMotion] Something is wrong [4 Attachments]
 
 
Tom,
I just switched to Version 4.33f and I am getting the following errors. With a g-code file I have run before.
 
Screenshot 2014-10-07 07.04.57
Screenshot 2014-10-07 07.05.44
Group: DynoMotion Message: 10326 From: engnerdan Date: 10/13/2014
Subject: Re: Something is wrong [2 Attachments]
No problem on the length of time, I have been busy and got it working by going back to the last release versi ok. I am away from the mill for a week. So I will not be able to test until then. 

Dan


Sent from my Verizon Wireless 4G LTE smartphone